Circulation, Vol 85, 323-332, Copyright © 1992 by American Heart Association
H Baumgartner, S Khan, M DeRobertis, L Czer and G Maurer
BACKGROUND. To evaluate normal regurgitant characteristics of St. Jude (SJ)
and Medtronic-Hall (MH) mitral valves, four sizes (25-31 mm) of each were
studied in a pulsatile flow model. METHODS AND RESULTS. Regurgitant flow
was measured by flowmeter at left ventricular pressures of 80, 130, and 180
mm Hg. Peak regurgitant flow rates ranged from 6.2 to 12.7 cm3/sec in SJ
valves and from 7.9 to 17.5 cm3/sec in MH valves. Regurgitant orifice areas
calculated from the Doppler continuity equation ranged from 1.6 to 2.0 mm2
in SJ valves and from 2.2 to 2.9 mm2 in MH valves. Regurgitant volumes
across the closed valve at a left ventricular pressure of 130 mm Hg were
normalized to an ejection time of 280 msec and ranged from 1.5 to 1.9 cm3
in SJ valves and from 2.1 to 2.8 cm3 in MH valves. Jets were imaged by
color Doppler in six rotational planes, and jet size and morphology were
compared with those of regurgitant jets from circular orifices with sizes
comparable to the calculated prosthetic valve regurgitant orifices (1.1-
3.1 mm2). SJ valves showed two converging jets from the pivot points, one
central jet, and a variable number of peripheral jets. The mean color jet
area derived from the six image planes ranged from 1.6 to 5.3 cm2. Aliasing
occurred only close to the valve (maximal distance 0.5- 2.0 cm). MH valves
showed a large central jet with a maximal length of aliased flow between
2.0 and 5.5 cm. Depending on valve size, driving pressure, and image plane,
one or two small peripheral jets were found. These jets did not show
aliasing in any case. The mean color jet area ranged from 5.1 to 11.0 cm2.
Jets originating from circular orifices of comparable size showed jet areas
from 5.5 to 13.9 cm2 and aliasing distances from 3.3 to 7.3 cm. At similar
regurgitant orifice areas, driving pressures, and regurgitant flows, the
measured color areas and aliasing distances were smallest in SJ valves,
larger in MH valves, and largest in simple circular orifices. CONCLUSIONS.
Large, complex regurgitant jets can be found in normal closed SJ and MH
valves by color Doppler, although regurgitant flow volume is minimal. Jet
size and velocity distribution differs markedly between SJ valves, MH
valves, and circular orifices, even with comparable driving pressure,
regurgitant orifice area, and regurgitant volume. The characteristic
patterns of normal regurgitation must be recognized to avoid incorrect
diagnoses of pathological regurgitation in SJ and MH prosthetic valves. MH
valves should not be removed solely on the basis of a central regurgitant
jet with a long aliasing distance. Peripheral jets in MH valves and all
jets in SJ valves should be considered normal as long as no or only minimal
aliasing is present. In contrast, peripheral jets with significant aliasing
may represent strong evidence of pathological regurgitation.
ARTICLES
Color Doppler regurgitant characteristics of normal mechanical mitral valve prostheses in vitro
Division of Cardiology and Cardiovascular Surgery, Cedars-Sinai Medical Center, Los Angeles, Calif.
This article has been cited by other articles:
![]() |
M. Josa, M. Castella, C. Pare, J. L. Bedini, R. Cartana, C. A. Mestres, J. L. Pomar, and J. Mulet Hemolysis in Mechanical Bileaflet Prostheses: Experience With the Bicarbon Valve Ann. Thorac. Surg., April 1, 2006; 81(4): 1291 - 1296. [Abstract] [Full Text] [PDF] |
||||
![]() |
S. Khan, A. Chaux, J. Matloff, C. Blanche, M. DeRobertis, R. Kass, T. P. Tsai, A. Trento, S. Nessim, R. Gray, et al. The St. Jude Medical valveExperience with 1000 cases J. Thorac. Cardiovasc. Surg., December 1, 1994; 108(6): 1010 - 1020. [Abstract] [Full Text] |
||||
|
Circulation Home | Subscriptions | Archives | Feedback | Authors | Help | AHA Journals Home | Search Copyright © 1992 American Heart Association, Inc. All rights reserved. Unauthorized use prohibited. |